Input | |
---|---|
Sensor supply US | 24 V DC (EN 61131-2), max. 200 mA (M12 female), short-circuit and overload protected |
Type | for 3-wire sensors or mechanical switches, PNP, IO-Link Devices |
Connections | |
Fieldbus | Ethernet 10/100 Mbit/s{} M12, D-coded |
Sensor-system/actuator supply | 7/8", 5-pole, 2 ? max. 9 A |
I/O ports | M12, 5-pole, A-coded |
General data | |
Protection | IP67 |
Mounting method | 2 hole screw mounting, compatible with I/O modules of MVK model range |
Dimensions H ? W ? D | 39?63?225 mm |
Temperature range | -25...+55 °C (storage temperature -25...+70 °C) |
PROFINET | |
FSU (Fast-Start-Up) | max. 500 ms |
Shared Device/Input | yes, for 2 controls |
PROFINET Netload Class | III |
Specification | V2.3, Conformance Class C (IRT) |
Addressing | DCP |
IO-Link | |
IO-Link | 4 ? Master |
Operating modes | COM1{} COM2{} COM3 (automatic) |
Transfer parameters | 32 Byte (via IO-Link Port) |
Port Class | Class A + B (not galvanically separated) |
Specification | IO-Link Master V1.12 |
Output | |
Actuator supply UA | 24 V DC (EN 61131-2), max. 9 A |
Switching current per output | max. 1.6 A (short-circuit and overload protected) |
Lamp load | 10 W |
Parameterization | |
PIN 4 | Input (port X0...X7){} Output (port X0, X2, X4, X6){} IO-Link Master (port X1, X3, X5, X7) |
PIN 2 | Input/Output (port X0...X7){} U-Actuator IO-Link Class B (port X5, X7) |
Diagnostic | |
Communication status | via LED |
Diagnostic via LED | per module and channel |
Diagnostic via BUS | per module and channel |
Monitoring - under voltage | yes |
Monitoring - no voltage | yes |
Short-circuit and overload | yes |
Actuator warning | per channel via LED and BUS |
Cable break | per port |
Commercial data | |
country of origin | DE |
customs tariff number | 85389099 |
EAN | 4048879585477 |
eClass | 27242604 |
Packaging unit | 1 |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |