Описание оборудования | |
---|---|
230 V AC | |
General specifications | |
Signal type | Digital Input |
Supply | |
Connection | terminals 11 (L1), 12 (N) |
Rated voltage | Или отправьте нам запрос на Hz |
Power consumption | approx. 0.8 W |
Input | |
Connection side | field side |
Connection | terminals 1 (mass), 2 (min), 3 (max) |
Open circuit voltage/short-circuit current | approx. 10 V AC (approx. 1 Hz) / approx. 5 mA |
Control input | min./max. control system: terminals 1, 2, 3 on/off control system: terminals 1, 3 |
Response sensitivity | 1 ... 30 k? , adjustable via potentiometer (20 turns) |
Output | |
Connection side | control side |
Connection | terminals 7, 8, 9 |
Output | 1 changeover contact |
Contact loading | 253 V AC/2 A/cos ? > 0.7; 40 V DC/2 A resistive load |
Energized/De-energized delay | approx. 1 s / approx. 1 s |
Galvanic isolation | |
Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Indicators/settings | |
Display elements | LEDs |
Control elements | DIP-switch potentiometer |
Configuration | via DIP switches via potentiometer |
Labeling | space for labeling at the front |
Directive conformity | |
Electromagnetic compatibility | |
Low voltage | |
Conformity | |
Insulation coordination | EN50178:1997 |
Galvanic isolation | EN50178:1997 |
Electromagnetic compatibility | NE 21:2006 |
Degree of protection | IEC 60529:2001 |
Ambient conditions | |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications | |
Degree of protection | IP20 |
Connection | screw terminals , max. 2.5 mm2 |
Mass | approx. 110 g |
Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) , housing type B1 |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Indication and operation | |
Control elements | switch S1 Position I open circuit current: In the open circuit current principle, the relay becomes active when the limit is reached. Position II closed circuit current: In closed circuit current principle, the relay is activated when power is applied. The relay is deactivated when the limit is reached. |
8 (029) 555-8-000 | <