Характеристики и описание
Описание оборудования | |
|---|---|
| Laser diffuse mode sensor with adjustable background suppression | |
General specifications | |
| Detection range | 40 ... 600 mm |
| Detection range min. | 40 ... 90 mm |
| Detection range max. | 40 ... 600 mm |
| Adjustment range | 90 ... 600 mm |
| Reference target | standard white, 100 mm x 100 mm |
| Light source | laser diode |
| Light type | modulated visible red light |
| Laser nominal ratings | |
| Black/White difference (6 %/90 %) | < 5 % at 300 mm |
| Diameter of the light spot | approx. 2.5 mm at a distance of 600 mm |
| Angle of divergence | approx. 0.3 ° |
| Ambient light limit | EN 60947-5-2 : 70000 Lux |
Functional safety related parameters | |
| MTTFd | 560 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
Indicators/operating means | |
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
| Function indicator | LED yellow: constantly on - object detected constantly off - object not detected |
| Control elements | Light-on/dark-on changeover switch |
| Control elements | Sensing range adjuster |
Electrical specifications | |
| Operating voltage | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 15 mA at 24 V supply voltage |
| Protection class | III |
Interface | |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Device profile | Identification and diagnosis Smart Sensor type 2.4 |
| Transfer rate | COM2 (38.4 kBaud) |
| IO-Link Revision | 1.1 |
| Min. cycle time | 2.3 ms |
| Process data witdh | Process data input 1Bit Process data output 2Bit |
| SIO mode support | yes |
| Device ID | 0x111613 (1119763) |
| Compatible master port type | A |
Output | |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Usage category | DC-12 and DC-13 |
| Voltage drop | ? 1.5 V DC |
| Switching frequency | 1650 Hz |
| Response time | 300 µs |
Conformity | |
| Communication interface | IEC 61131-9 |
| Product standard | EN 60947-5-2 |
| Laser safety | EN 60825-1:2014 |
Approvals and certificates | |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| CCC approval | |
Описание оборудования
Triangulation sensor (BGS) OBT600-R201-2EP-IO-0,3M-V1-L
Под заказ
Цену уточняйте
Минск ∙
Доставка
Оплата и гарантии