Distance sensor OMT50-R100-2EP-IO-0,3M-V1-L - фото 1 - id-p95192021

Характеристики и описание

Описание оборудования
Measurement to object, 50 mm detection range, red laser light, laser class 1, measured value via IO-Link, 2 x push-pull output, pigtail with M12 plug
General specifications
Measurement range	20 ... 50 mm
Light source	laser diode
Light type	modulated visible red light
Laser nominal ratings
Diameter of the light spot	approx. 0.5 mm at a distance of 50 mm
Angle of divergence	approx. 0.6 °
Resolution	0.01 mm
Functional safety related parameters
MTTF_d	560 a
Mission Time (T_M)	20 a
Diagnostic Coverage (DC)	0 %
Indicators/operating means
Function indicator	LED yellow: constantly on - switch output active constantly off - switch output inactive
Control elements	Teach-In key
Electrical specifications
Operating voltage	10 ... 30 V DC
Interface
Interface type	IO-Link ( via C/Q = pin 4 )
IO-Link Revision	1.1
Min. cycle time	3 ms
Process data witdh	Process data input 3Byte Process data output 2Bit
Compatible master port type	A
Output
Switching type	The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link Q2 - Pin2: NPN normally open, PNP normally closed
Signal output	2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Usage category	DC-12 and DC-13
Compliance with standards and directives
Directive conformity
Standard conformity
Measurement accuracy
Warm up time	5 min
Linearity error	± 0.2 mm
Approvals and certificates
FDA approval	IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Mechanical specifications
Degree of protection	IP67 / IP69 / IP69K
Connection	300 mm fixed cable with M12 x 1, 4-pin connector
Material